D-shape
Bidetlity New Standard
€99.00
Paper was a strange idea.
What shape is your toilet?
Which shape do I have?
Look down at your toilet seat: at the back (toward the wall) a straight edge = D-shape (often modern wall-hung toilets), all round round/oval = O-shape.
Cold-water hose – choose length – distance toilet ↔ cold-water connection
The Warm-water hose (300 cm) is always included – just trim to the right length. Only the Cold-water hose you choose here.
How to measure right
We mean the Cold-water hose: the cold-water connection sits on the right of the bidet attachment (seen from the front). Measure from there to your shut-off valve or sink. 300 cm not enough? Extensions in the accessories.
Free shipping
30-day returns
2-yr warranty
- Your own bidet in just 20 minutes
- No electricity
- Warm & cold water
- Individually adjustable water pressure
- Separate front & rear cleaning
- Automatic nozzle cleaning
- Cold-water-only option too (cap included)
Product details
Turn your toilet into a bidet.
The Bidetlity New Standard is a Non-electric bidet attachment – a retrofit bidet for your existing toilet, installed in about 20 minutes. No power. No remodel. Just water instead of paper.
Ideal for
- Anyone switching from paper to water for good
- More comfort every time you go
- Sensitive skin, hemorrhoids & irritation
- People who want to upgrade their bathroom
Not made for
- ✕Toilets outside the compatibility measurements
- ✕Homes without a suitable water connection
- ✕Outdoor areas or unheated rooms
Water-driven
Every function that counts
A non-electric bidet. No menus. Just water and a dial.
Warm or cold
Temperature at the dial, however you feel. A non-electric bidet.
Two nozzles
Rear and front, each adjustable. Water pressure extends them.
Self-cleaning
The nozzles rinse before and after every visit. Clean in, clean out.
Pressure by feel
One dial, stepless – from gentle to strong.
Soft-close seat
The lid closes quietly on its own. No slamming.
Warm or cold
Warm or cold – your dial.
Stepless temperature at the mixing dial. Never the cold surprise – a non-electric bidet through and through.
Two nozzles
Two nozzles – for rear and front.
A separate nozzle for back and front, each adjustable on its own. Water pressure alone extends them – otherwise they stay tucked inside the seat.
Self-cleaning
Self-cleaning, before and after every visit.
The nozzles rinse themselves clear automatically. Clean in, clean out.
Pressure by feel
Pressure, the way you want it.
One dial, stepless – from gentle to strong.
Soft-close seat
Gentle in, quiet shut.
The lid closes quietly on its own. No slamming.
Deluxe vs. New Standard
New Standard
Warm & cold water
✓
✓
Adjustable pressure
✓
✓
Soft-close lid
✓
✓
Works without electricity
✓
–
Heated seat
–
✓
Warm-air dryer
–
✓
Remote
–
✓
Night light
–
✓
Eco mode
–
✓
Price
from €99
249 €
Technical data
CompatibilityClassic ceramic toilets · D-shape & O-shape
OperationCompletely power-free – purely water-driven
Water connectionWarm & cold water (or cold-only, cap included)
Backflow protectionintegrated
Cold-water hose9/16″ × 1/2″
T-piece1/2″ + 3/8″
Wash nozzles2 nozzles – back & front, self-cleaning
Water temperatureInfinitely adjustable (mix warm/cold)
Water pressureInfinitely adjustable
Seat & dimensionsSoft-close · 48.7 × 39 cm · inner opening 28 × 21 cm
MaterialABS plastic
What's included
Bidet attachment (water-driven, no power)
Cold- & warm-water T-piece (1/2″ + 3/8″)
Plastic connector with nut
Warm-water cap (for cold-only operation)
Cold-water connection hose (9/16″ × 1/2″ · length 100 / 200 / 300 cm – you choose)
Warm-water connection hose (300 cm, trimmable to length)
Mounting plate & 2 adjustable brackets
Screws, wall plugs, nuts & Teflon tape
Mounting template (D- or O-shape)
User manual (DE/EN)
Shipping & returns
ShippingFree within Germany
Delivery time1 to 2 business days
Returns30-day return policy
Warranty2 years
No guesswork
Does the bidet attachment fit your toilet?
Fits most common ceramic toilets.
Distance to the wall
min. 3.2 cm
Length of the toilet
41–45 cm
Hole spacing
12–16 cm
Classic toilet with 2 holesTake the seat off: can you see two holes in the ceramic? Then it fits. QuickRelease hinges unscrew like any other. Some design toilets have hidden fixings with no holes. Those won't work.
Cold water nearbyShut-off valve or sink within reach. Cold water is enough – warm water is optional (cap included).
Quick measureCheck the 3 measurements above. Not sure? Order the free template – lay it on, done.
Not sure? Free template.
Sent free of charge – in your shape (D or O).
Lay it down, check, be sure.
Lieber vorher fragen?
Schick uns ein Foto deiner Toilette im Chat. Wir sehen daran meistens sofort, ob etwas dagegen spricht.
Markus, Co-Founder. Antwortet werktags meist unter 30 Minuten.
In about 20 minutes
Retrofit your bidet – here’s how
Old seat off, New Standard on, water connected. Retrofitted.
Step 1
Old seat off
Unscrew and remove the old toilet seat. Set the New Standard on the base plate until it clicks in.
Step 2
Connect the T-pieces
Briefly shut off the water. Mount two T-pieces – on warm and cold water (or cold only, with the cap).
Step 3
Connect the hoses
Run the warm- and cold-water hose from each T-piece to the bidet attachment and tighten.
Step 4
Turn on, done!
Slowly open the water and check for leaks – no power, no outlet needed. Off you go.
1
Old seat off
Unscrew and remove the old toilet seat. Set the New Standard on the base plate until it clicks in.
2
Connect the T-pieces
Briefly shut off the water. Mount two T-pieces – on warm and cold water (or cold only, with the cap).
3
Connect the hoses
Run the warm- and cold-water hose from each T-piece to the bidet attachment and tighten.
4
Turn on, done!
Slowly open the water and check for leaks – no power, no outlet needed. Off you go.
Often bought together
Pairs perfectly — often ordered together by our customers.
Frequently asked questions
Does the bidet attachment need power?+
No. It runs purely on your line’s water pressure – no cable, no outlet.
Is there warm water – with no power at all?+
Yes. Connected to a warm-water line, warm water comes out of the nozzle.
Can I run the bidet attachment on cold water only?+
Yes. A cap for the hot-water inlet is included – you connect the cold water only and leave the hot-water inlet capped. Warm water is optional, not required.
Does the bidet attachment fit my toilet?+
Most common ceramic toilets. To be sure, order the free fit template – lay it down, check, done.
Does the bidet attachment fit if my toilet seat has QuickRelease?+
Almost always, yes. QuickRelease is a feature of the seat, not the ceramic: the button only releases the seat from its hinges so you can lift it off for cleaning. The hinges themselves are bolted through the two holes and unscrew like any other. So what matters is the ceramic: take the seat off and look for two holes. If they're there, it fits. Only design toilets with hidden fixings and no holes won't work.
D-shape or O-shape – which do I need?+
O-shape is round/oval, D-shape has a straight edge at the back (toward the wall) (often on modern wall-hung toilets). The bidet attachment comes in both shapes – the free template shows you which fits your ceramic.
How do I mount the bidet attachment on my toilet?+
Old seat off, bidet attachment on, connect the water at the shut-off valve – in about 20 minutes, no handyman needed. If you’re unsure about the water connection, bring in a pro.
Can water run back into the supply line?+
The bidet attachment has integrated backflow protection at the water inlet – it stops water from running back from the unit into the supply line. The design helps too: the spray arm sits above the water line and only extends when you use it. At rest it is fully retracted and has no contact with the water in the bowl.
What if the hot-water hose is too long?+
Not a problem. The hot-water hose is 300 cm of PU tubing – just cut it to the length your bathroom needs, with scissors or a knife.
Can I retrofit a bidet attachment in a rental?+
Yes. No drilling, no remodeling, no power. The bidet attachment mounts on the existing seat holes of your toilet and comes off the same way when you move out – old seat back on, done.
What does it cost to retrofit a non-electric bidet?+
99 euros. Nothing else. No electrician, no plumber, no remodel. T-pieces and hoses are included, and we send you the fit template free.
Two nozzles – what for?+
One for the butt, one for the vulva – both self-cleaning. Targeted cleaning, nothing overlaps.
Are the nozzles out all the time?+
No. The nozzles sit tucked away under the seat and stay out of sight. They only extend once you start the wash at the dial – then they retract again, rinsing themselves clean on the way.
Aren’t wet wipes just as good?+
No. Water cleans more thoroughly and is gentler on skin – and it doesn’t clog pipes. Paper was a strange idea.
New Standard or Deluxe – which one is for me?+
The New Standard runs without power: warm and cold water from the lines you already have, one dial, done. The Deluxe needs an outlet and heats on its own – which gets you a heated seat, a warm-air dryer and a remote. Both clean with water. The difference is the comfort around it.
How long is the warranty and return period?+
2-year warranty and 30-day returns. More questions? Reach us anytime at hello@bidetlity.com.
Free shipping
30-day returns
2-yr warranty
Almost done — which cold-water hose length?
Choose the length of your Kaltwasserschlauchs: Measure the distance from the toilet to the cold-water connection (sink or shut-off valve). The warm-water hose (300 cm) is always included and can be shortened.
How to measure correctly
The cold-water connection sits on the right of the bidet attachment (seen from the front). Measure from there to your shut-off valve or sink.
All lengths at no extra charge – from 200 cm, extension + connector are included free.
What shape should the template be?
Sent to you free. Lay it down, check, be sure.
