D-shape
Bidetlity New Standard
99,00 €
Bidet seat without electricity.
Installed in 20 minutes.
Installed in 20 minutes.
What shape is your toilet?
Which shape do I have?
Look down at your toilet seat: at the back (toward the wall) a straight edge = D-shape (often modern wall-hung toilets), all round round/oval = O-shape.
Cold-water hose – choose length – distance toilet ↔ cold-water connection
The Warm-water hose (300 cm) is always included – just trim to the right length. Only the Cold-water hose you choose here.
How to measure right
We mean the Cold-water hose: the cold-water connection sits on the right of the bidet attachment (seen from the front). Measure from there to your angle valve or sink and allow a little slack for the hose. 400 cm not enough? Extensions are in the accessories.
Free shipping
30-day returns
2-year warranty
- No power needed.
- Warm & cold water.
- Infinitely adjustable water pressure.
- Butt & intimate cleaning.
- Self-cleaning nozzles.
- Installed yourself in about 20 minutes.
Product details
Your new standard.
The Bidetlity New Standard turns your existing toilet into a bidet seat without electricity. With warm and cold water, infinitely adjustable water pressure and separate butt & intimate cleaning. No new toilet. No remodelling.
You simply replace your existing toilet seat and install the New Standard yourself in about 20 minutes. It runs on water pressure alone and needs no socket.
For everyone who wants to make water the new standard:
- Warm & cold water, entirely without electricity
- Infinitely adjustable water pressure
- Separate butt & intimate cleaning
- Self-cleaning nozzles
- Also works with cold water only
- Installed yourself in about 20 minutes, no new toilet, no plumber
Not made for
- ✕Toilets outside the compatibility measurements
- ✕Homes without a suitable water connection
- ✕Outdoor areas or unheated rooms
New Standard
Every feature in detail
A small upgrade for your loo.
A pretty big one for your butt.
Warm water.
No power needed.
No power needed.
Hot or cold. Set the temperature with the dial.
Butt & vulva.
Two nozzles.
Two nozzles.
Choose which one you use.
Self-cleaning
nozzles.
nozzles.
Rinse themselves before and after every use.
Pressure.
Your way.
Your way.
Fully adjustable. From gentle to strong.
Soft-close. No slamming.
Seat and lid close slowly and quietly.
Warm water
Warm water.
No power needed.
Hot or cold. Set the temperature with the dial.
Front & rear wash
One for the front.
One for the back.
Separate nozzles for butt and vulva.
Your choice.
Self-cleaning
Clean.
Before and after.
The nozzles rinse themselves before and after every use.
Water pressure
Pressure.
Your way.
Fully adjustable. From gentle to strong.
Soft-close
Quiet is the new standard.
Seat and lid close slowly and quietly. No slamming.
Deluxe vs. New Standard
New Standard
Warm water
✓
✓
Warm water without a warm-water connection
–
✓
Also works with cold water only
✓
✓
Adjustable pressure
✓
✓
Soft-close lid
✓
✓
Works without electricity
✓
–
Heated seat
–
✓
Warm-air dryer
–
✓
Remote
–
✓
Night light
–
✓
Eco mode
–
✓
Price
from €99
249 €
Technical data
CompatibilityClassic ceramic toilets · D-shape & O-shape
OperationCompletely power-free – purely water-driven
Water connectionWarm & cold water (or cold-only, cap included)
Backflow protectionintegrated
Cold-water hose9/16″ × 1/2″
T-piece1/2″ + 3/8″
Wash nozzles2 nozzles – back & front, self-cleaning
Water temperatureInfinitely adjustable (mix warm/cold)
Water pressureInfinitely adjustable
Seat & dimensionsSoft-close · 48.7 × 39 cm · inner opening 28 × 21 cm
MaterialABS plastic
OriginChina
What's included
Bidet attachment (water-driven, no power)
Cold- & warm-water T-piece (1/2″ + 3/8″)
Plastic connector with nut
Warm-water cap (for cold-only operation)
Cold-water connection hose (9/16″ × 1/2″ · length 100 / 200 / 300 / 400 cm – you choose) – from 200 cm in two parts: 100 cm hose + extension + connector
Warm-water connection hose (300 cm, trimmable to length)
Mounting plate & 2 adjustable brackets
Screws, wall plugs, nuts & Teflon tape
User manual (DE/EN)
Shipping & returns
ShippingFree within Germany
Delivery time1 to 2 business days
Returns30-day return policy
Warranty2 years
No guesswork
Does New Standard
fit your toilet?
Usually yes. Three measurements decide.
Which shape do I have?
Look down at your toilet seat: at the back (toward the wall) a straight edge = D-shape (often modern wall-hung toilets), all round round/oval = O-shape.
Distance to the wall
min. 3.2 cm
Length of the toilet
41–45 cm
Hole spacing
12–16 cm
Classic toilet with 2 holesTake the seat off: can you see two holes in the ceramic? Then it fits. QuickRelease hinges unscrew like any other. Some design toilets have hidden fixings with no holes. Those won't work.
Cold water nearbyShut-off valve or sink within reach. Cold water is enough – warm water is optional (cap included).
Quick measureCheck the 3 measurements above. Not sure? Send us a photo of your toilet in the chat.
Want to ask first?
Send us a photo of your toilet in the chat. We can usually tell right away if anything stands in the way.
Markus, co-founder. Usually replies within 30 minutes on weekdays.
In about 20 minutes
Installed yourself. No plumber.
Old seat off, New Standard on, connect the water. Retrofit done.
Step 1
Old seat off
Unscrew and remove the old toilet seat. Set the New Standard on the base plate until it clicks in.
Step 2
Connect the T-pieces
Briefly shut off the water. Fit two T-pieces – to the warm and cold water supply. Cold water only? Then the warm water inlet stays closed with the cap included.
Step 3
Connect the hoses
Run the warm- and cold-water hose from each T-piece to the bidet attachment and tighten.
Step 4
Turn on, done!
Slowly open the water and check for leaks – no power, no outlet needed. Off you go.
1
Old seat off
Unscrew and remove the old toilet seat. Set the New Standard on the base plate until it clicks in.
2
Connect the T-pieces
Briefly shut off the water. Fit two T-pieces – to the warm and cold water supply. Cold water only? Then the warm water inlet stays closed with the cap included.
3
Connect the hoses
Run the warm- and cold-water hose from each T-piece to the bidet attachment and tighten.
4
Turn on, done!
Slowly open the water and check for leaks – no power, no outlet needed. Off you go.
Often bought together
Pairs perfectly — often ordered together by our customers.
Frequently asked questions
Does the bidet attachment need power?+
No. It runs purely on your line’s water pressure – no cable, no outlet.
Is there warm water – with no power at all?+
Yes. Connected to a warm-water line, warm water comes out of the nozzle.
Can I run the bidet attachment on cold water only?+
Yes. A cap for the hot-water inlet is included – you connect the cold water only and leave the hot-water inlet capped. Warm water is optional, not required.
Does the bidet attachment fit my toilet?+
Most common ceramic toilets. To be sure, send us a photo of your toilet in the chat – we'll tell you whether it fits.
Does the bidet attachment fit if my toilet seat has QuickRelease?+
Almost always, yes. QuickRelease is a feature of the seat, not the ceramic: the button only releases the seat from its hinges so you can lift it off for cleaning. The hinges themselves are bolted through the two holes and unscrew like any other. So what matters is the ceramic: take the seat off and look for two holes. If they're there, it fits. Only design toilets with hidden fixings and no holes won't work.
D-shape or O-shape – which do I need?+
O-shape is round/oval, D-shape has a straight edge at the back (toward the wall) (often on modern wall-hung toilets). The bidet attachment comes in both shapes – look down at your toilet seat: a straight edge at the back = D-shape, round all around = O-shape.
How do I mount the bidet attachment on my toilet?+
Old seat off, bidet attachment on, connect the water at the shut-off valve – in about 20 minutes, no handyman needed. If you’re unsure about the water connection, bring in a pro.
Can water run back into the supply line?+
The bidet attachment has integrated backflow protection at the water inlet – it stops water from running back from the unit into the supply line. The design helps too: the spray arm sits above the water line and only extends when you use it. At rest it is fully retracted and has no contact with the water in the bowl.
What if the hot-water hose is too long?+
Not a problem. The hot-water hose is 300 cm of PU tubing – just cut it to the length your bathroom needs, with scissors or a knife.
Can I retrofit a bidet attachment in a rental?+
Yes. No drilling, no remodeling, no power. The bidet attachment mounts on the existing seat holes of your toilet and comes off the same way when you move out – old seat back on, done.
What does it cost to retrofit a non-electric bidet?+
99 euros. Nothing else. No electrician, no plumber, no remodel. T-pieces and hoses are included.
Two nozzles – what for?+
One for the butt, one for the vulva – both self-cleaning. Targeted cleaning, nothing overlaps.
Are the nozzles out all the time?+
No. The nozzles sit tucked away under the seat and stay out of sight. They only extend once you start the wash at the dial – then they retract again, rinsing themselves clean on the way.
Aren’t wet wipes just as good?+
No. Water cleans more thoroughly and is gentler on skin – and it doesn’t clog pipes. Paper was a strange idea.
New Standard or Deluxe – which one is for me?+
The New Standard runs without power: warm and cold water from the lines you already have, one dial, done. The Deluxe needs an outlet and heats on its own – which gets you a heated seat, a warm-air dryer and a remote. Both clean with water. The difference is the comfort around it.
How long is the warranty and return period?+
2-year warranty and 30-day returns. More questions? Reach us anytime at hello@bidetlity.com.
Free shipping
30-day returns
2-year warranty
Almost done — which cold-water hose length?
Choose the length of your cold-water hose: Measure the distance from the toilet to the cold-water connection (sink or shut-off valve). The warm-water hose (300 cm) is always included and can be shortened.
How to measure correctly
The cold-water connection sits on the right of the bidet attachment (seen from the front). Measure from there to your shut-off valve or sink.
All lengths at the same price. From 200 cm your hose comes in two parts – extension + connector included free.
